Using Narrow Material/
Preventing Marking Made by the
Middle Pinch Rollers
When using narrow material and when using material that is easily marked by the
pinch rollers, use just the pinch rollers on the ends to feed the material. In this
mode, the middle pinch rollers are not used (they are disabled).
Reducing the Force of the Middle Pinch Rollers
Procedure
Make sure the material is loaded in the machine.
Press [MENU] several times to display the
screen shown in the figure.
Press [ ] several times to display the screen
shown in the figure.
Press [ ].
Press [ ] to display the screen shown in the