Roland GR-640 User Manual page 364

Saving the Cutting Conditions
The current cutting conditions can be saved to memory.
Eight sets of settings can be saved to USER 1 to USER 8 memories. Overwriting a
memory deletes any old conditions it contains.
Procedure
Make sure the material is loaded in the machine.
Press [MENU] several times to display the screen
shown in the figure.
Press [ ].
Press the [ ] key, the [ ] key, and then press the
[ ] key.
The display shows the values of the FORCE, SPEED, and OFFSET menus from
the left.
Use [ ] and [ ] to select the memory number you
want to save the cutting conditions to.