Roland GR-640 User Manual page 369

Step 1: Prepare the Data for
Recutting
CAUTION
Clear all data remaining in the machine's memory, and then send new data so that only
the required data is stored in the machine's memory.
Procedure
Make sure the material is loaded in the machine.
Press [MENU] several times to display the screen
shown in the figure.
Press [ ] several times to display the screen
shown in the figure.
If [NO DATA] is displayed, proceed to step 6.
Press [ ].
Never touch the cutting carriage while output is in
progress.
The cutting carriage moves at high speed. Coming into
contact with the moving carriage may cause injury.