Roland GR-640 User Manual page 11

Back
Number
12 USB connector
13 Ethernet connector
14 Power-cord connector
15 Material basket
Operation Panel
Use this to set and operate the machine.
Number Name
16 PINCH key
17 Display
18 Cursor keys
19 CUT CONFIG key
20 ORIGIN key
21 PAUSE key
22 SHEET CUT key
Name
This is for connecting a USB cable.
This is for connecting an Ethernet cable.
This is for connecting a power cord.
This receives and stores the material that is cut from the roll.
Use this to raise and lower the pinch rollers. Use this when
inserting or removing the material.
When the pinch rollers are lowered, this key lights.
This displays various setting menus and other information.
You use these to select settings for menu items, to move
the material, and for other such operations.
Use this to set cutting conditions such as the blade force
and the cutting speed.
Perform a cutting test to check the conditions you have set.
Use this to set the origin to the current blade position.
Hold down this key for one second or longer.
This pauses printing operation. Press it again to restart
operation.
This lights when operation is paused.
Use this to cut the material from the roll. Hold down this
Description
Description
Notation used in
this document
[PINCH]
- - -
［ ］ ［ ］
［ ］ ［ ］
[CUT CONFIG]
[ORIGIN]
[PAUSE]
[SHEET CUT]