Step 5: Perform Cutting
(Manual Mode)
CAUTION
Referring to the
smoothly.
Procedure
Press the [ ] key, and then press the [ ] key to
select 4-POINT START.
If using 3 crop marks, select 3-POINT START. The screen shown in the
following figure is displayed.
Press [ENTER].
The screen shown in the following figure is displayed.
Never touch the cutting carriage while output is in
progress.
The cutting carriage moves at high speed. Coming into
contact with the moving carriage may cause injury.
Menu Flow Chart
as you proceed will help the setting procedure go