Roland GR-640 User Manual page 24

Installing the Cutting Tool
CAUTION
Notice：Use the blade which suit material
There is a risk of damage to blade when you cut unspecified sheet because of compatibility
between blade and sheet. Use the optimal blade for cutting to sheet material.
Items Required (Included Items)
Adjusting the Amount of Blade Extension
Adjust the amount of blade extension according to the material.
You may not have to make this adjustment. Adjust the amount of blade extension
as required.
The amount of blade extension can be adjusted by 0.5 mm for a full turn of the cap.
Adjusting the Cutting-in Amount
Installing the Cutting Tool
Never touch the tip of the blade.
Doing so may result in injury.
Blade holder/pin Blade