Communications Cycle Time Reference Table; Master User-Set Allocations Reference Table - Omron CS1W-DRM21 Operation Manual

Allocated DM Area Words
3-3-5

Communications Cycle Time Reference Table

Ranges
3-3-6

Master User-set Allocations Reference Table

Word
Bit 15
m+19
m+20
m+21
m+22
m+23
m+24
m+25
m+26
m+27
m+28
m+29
m+30
90
This table can be used to access the present, maximum and minimum com-
munications cycle times. All the values in this table are cleared from the Unit
and the maximum and minimum values are updated with new values when
the Communications Cycle Time Reference Table Clear Switch (word n, bit
13) is turned ON.
Word
m+15
m+16
m+17
m+18
Name
Communications cycle time set-
ting value (ms)
Communications cycle time
present value (ms)
Communications cycle time maxi-
mum value (ms)
Communications cycle time mini-
mum value (ms)
The settings (area and size) for a maximum of four blocks (OUT block 1, OUT
block 2, IN block 1, and IN block 2) can be accessed in the master user-set
allocations reference table.
The OUT 1 and IN 1 areas and sizes are valid even if a Configurator is not
being used.
Reserved by system
First word in OUT block 1
No. of bytes in OUT block 1
Reserved by system
First word in IN block 1
No. of bytes in IN block 1
Reserved by system
First word in OUT block 2
No. of bytes in OUT block 2
Reserved by system
First word in IN block 2
No. of bytes in IN block 2
Bit 15
Communications cycle time setting value (ms)
Communications cycle time present value (ms)
Communications cycle time maximum value (ms)
Communications cycle time minimum value (ms)
Range
0000 to
01F4 Hex (0
to 500)
0000 to
FFFF Hex
(0 to 65535)
Bit 08 Bit 07
OUT block 1 area
IN block 1 area
OUT block 2 area
IN block 2 area
Section 3-3
Bit 00
Details
Provide the communications cycle
time setting as well as the present,
maximum, and minimum commu-
nications cycle time in millisec-
onds. The default settings is
0000Hex (0).
Bit 00