User-set Allocations
Setting through the
Configuration
5-3-3
Connection Types
134
A maximum of three blocks can be allocated at any locations in I/O memory
for the output (OUT) area block 1, input (IN) area block 1, and input (IN) area
block 2.
Specified area in I/O memory
User-set block order
Bit
15
First word
specified
Slave output
(OUT) area 1
to
Bit
15
First word
specified
Slave input
(IN) area 1
to
Bit
15
First word
specified
Slave input
(IN) area 2
to
The block allocation order and block allocation areas can be set as required.
Refer to the DeviceNet Configurator Operation Manual (W382) for details on
the allocation procedure.
The type of connection can be specified if the Configurator is used for set-
tings. The number of applicable allocation areas varies with the type of con-
nection used.
• A maximum of three areas (OUT 1, IN 1, and IN 2) can be used when
multiple connections are specified.
• Two allocation areas (OUT 1 and IN 1) can be used if the automatic con-
nection setting or a single connection is specified.
Master
0
OUT area
0
IN area
0
IN area
Section 5-3