Software Switches 2 (Word N+1) - Omron CS1W-DRM21 Operation Manual

Allocated CIO Area Words
Bit Name Status
14 Commu- OFF→
nications ON
Cycle
Time
OFF
Refer-
ence
Table
Clear
Switch
3-2-2

Software Switches 2 (Word n+1)

Word n+1 [n = CIO 1,500 + (25 x unit number)]
Bit Name Status
00 Reserved ---
to by system
05
Con-
trolled
by
User Clears data in the Communications Cycle Time Refer-
ence Table (words m+15 to m+18). The data that is
cleared will be updated with new data.
Unit Returns to OFF after the data in the Communications
Cycle Time Reference Table (words m+15 to m+18)
has been cleared.
All switches are turned ON by the user. The Unit automatically turns them
OFF after the function is executed. Once a function is set by turning a switch
ON (except for the switches listed below), it is saved regardless of whether the
power is turned OFF and back ON again.
• Slave COS Send Switch (bit 12)
• Unit Setup File Restore Switch (bit 14)
• Unit Setup File Backup Switch (bit 15)
If multiple bits are turned ON simultaneously, the requests will generate errors
but they will not alter Unit operation. The corresponding error bits in the follow-
ing words will turn ON if a request made by a software switch ends in an error.
• Slave Status 1
Con-
trolled by
--- ---
Unit operation
Unit operation
Section 3-2
Operation condi- Default
tions setting
CPU Mas- Scan
Unit ter list
oper- func- sta-
ating tion tus
mode
--- --- --- None
Operation Default
conditions setting
CPU Slave
Unit func-
oper- tion
ating
mode
--- --- ---
69