File Names - Omron CS1W-DRM21 Operation Manual

Memory Card Backup Functions
3. Saving Files from Configurator to Memory Card
DeviceNet Unit
All
setup
data
7-2-2

File Names

188
DeviceNet Unit
All setup
data
Note If there is an error in the setup data or if the file could not be read, the File
Read/Write Error bit in Unit Status 2 (word n + 11, bit 08) will turn ON.
Device parameter files (.dvf files) for this DeviceNet Unit that have been cre-
ated using the Configurator can be saved on the Memory Card via the HMC-
AP001 Memory Card Adaptor as file name DNnnBKUP.dvf (where nn is the
Unit number in 2-digit hexadecimal). This DeviceNet Unit can be mounted to
the CPU Unit and, by turning ON the Unit Setup File Restore Switch (word n,
bit 14), the setup data can be restored to the DeviceNet Unit.
Note The file name when saving setup data to the Memory Card must be DNnn-
BKUP.dvf (where nn is the Unit number in 2-digit hexadecimal). For example,
for unit number 00, the file name must be DN00BKUP.dvf. If the file is saved
under another name, the data cannot be restored from the Memory Card to
the DeviceNet Unit.
CPU Unit
Unit Setup File Restore Switch
HMC-AP001 Memory Card Adaptor
Memory Card
Restore
Saving device
parameter file
The following files are created on the Memory Card.
Directory (fixed): Route and directory.
File name (fixed): DNnnBKUP.dvf (nn: Unit number in 2-digit hexadecimal).
Note The data in the above files is compatible with the data in the DeviceNet Unit
device parameter file.
CPU Unit
Unit Setup File Restore Switch
Memory Card
Restore
Configurator (com-
puter)
Memory Card
Saved as file name DNnnBKUP.dvf, where nn
is the Unit number in 2-digit hexadecimal.)
Section 7-2