List of Command Codes
RESET (0403)
Command Block
Response Block
End Code
Explanation
READ CONTROLLER INFORMATION (0501)
Appendix C
FINS Commands and Responses for
DeviceNet Units
Command type
RESET
CONTROLLER DATA READ
CONTROLLER STATUS READ 0601
ECHOBACK TEST
ERROR LOG READ
ERROR LOG CLEAR
Refer to SYSMAC CS/CJ Series Communication Commands Reference Man-
ual (W342) for details on end codes.
Resets (restarts) the DeviceNet Unit.
Resets the DeviceNet Unit.
Command code
There are no responses for this command
End code (hex)
1001
• Resets the DeviceNet Unit.
• A communications error has occurred at the Slave but the Slave will
restore after the DeviceNet Unit has started up.
• The remote device communicating the message may have timed out but
communications can be performed normally after the DeviceNet Unit has
started up.
Reads the following DeviceNet Unit information.
• Model
• Version
• Node address
Command code
0403
0501
0801
2102
2103
Contents
The command length exceeds maximum
command length.
Reference page
247
247
248
249
250
251
247