Connecting To The Cx-Programmer Via The Devicenet - Omron CS1W-DRM21 Operation Manual

Connecting to the CX-Programmer via the DeviceNet

7-1

Connecting to the CX-Programmer via the DeviceNet

182
With CX-Programmer Ver. 2.1 or higher, a serial connection can be made to a
PLC containing a CS/CJ-series DeviceNet Unit to form an online connection,
via the DeviceNet, to other PLC CPU Units on the network.
• CS-series CPU Unit
• CJ-series CPU Unit
• Programmable Slave
DeviceNet Unit
Serial -->
DeviceNet
gateway
It is also possible to form an online connection (for remote programming or
monitoring) with the PLC CPU Units shown above on the DeviceNet network
from another network.
CX-Programmer
Ver. 2.1 or higher
Ethernet
Ethernet Unit
CX-Programmer Ver. 2.1
or higher
Serial connection (Host Link or
peripheral bus)
Online connection (enabling all online functions,
including remote programming and monitoring)
DeviceNet
CJ-series CPU
CS-series CPU
Unit
Unit
Ethernet --> DeviceNet
gateway
DeviceNet Unit
Online connection (enabling all online functions,
including remote programming and monitoring)
CS/CJ-series
Section 7-1
Programmable
Slave
DeviceNet
DeviceNet Unit
Programmable
Slave