Front Panel Analog Audio Input Levels - Extron electronics XTP II CrossPoint Series User Manual

Save a preset from the front panel
1. Press the
2. Hold the
remains lit. The input or output buttons that correspond to presets with a saved
configuration light as well.
3.
Press the input button that corresponds to the desired preset number. The selected
button blinks along with the
4. Press the
Recall a preset from the front panel
1. Press the
2. Press the
that correspond to presets with a saved configuration light.
3. Press the input or output button that corresponds to the desired preset. The selected
input or output button blinks along with the
4. Press the

Front Panel Analog Audio Input Levels

Each analog audio input level has a range of -18 dB to +24 dB (0 dB is default). Adjust
the analog audio input to ensure there is no noticeable output volume difference between
sources. To adjust the analog audio input levels from the front panel, remove any front panel
locks that prevent front panel operation (see
NOTE: Gain and attenuation apply to local inputs only.
1. Press the
2. Hold the
3. Press the input button that corresponds to the desired analog audio input. The output
buttons light to indicate the current audio level.
NOTES:
•
•
•
4. Press the
Highest Numbered Output Button Illumination for Analog Audio Input Levels
dB
24
23
22
21
20
19
18
button to clear pending actions.
Esc
button in until it blinks (approximately 2 seconds). The
Preset
Enter
button to save the preset.
Enter
button to clear pending actions.
Esc
button. The
Preset Preset
button.
Enter
button to clear pending actions.
Esc
button until the button blinks.
Audio
Each output button represents 1 dB except on 1600 models. On 1600 models,
each output button represents 1 dB when blinking and 2 dB when lit steadily.
When output buttons light or blink green, gain is applied to the audio level.
When output buttons light or blink red, attenuation is applied to the audio level.
to increase the audio level or the
Esc
1600 Models
Button # Button Color/State
12 Green/Solid
12 Green/Blinking
11 Green/Solid
11 Green/Blinking
10 Green/Solid
10 Green/Blinking
9 Green/Solid
XTP II CrossPoint Series • Front Panel Operation
button.
button along with any input or output buttons
button.
Enter
Front Panel Lockout Modes
button to decrease the audio level.
View
Button #
24
23
22
21
20
19
18
button
Preset
on page 34).
Other Models
Button Color/State
Green/Solid
Green/Solid
Green/Solid
Green/Solid
Green/Solid
Green/Solid
Green/Solid
30