Example 3: Removing A Tie From A Set Of Computer Video And Audio Ties - Extron electronics MPX 866 A User Manual

im Vertrieb von

Example 3: Removing a tie from a set of computer video and audio ties

Press and release the Computer Input 5 button.
The LED lights.
COMPUTER INPUTS
2 3
www.camboard.de
CAMBOARD Electronics
In the following example, an existing audio tie is removed from the current
confi guration. The steps show the front panel indications that result from your
action.
N This example assumes that you have performed example 1 and example 2.
1. Press and release the Esc button (fi gure 3-15).
Press the Esc button to clear all selections.
CONTROL
ENTER PRESET
VIEW
= Blink once The LED blinks once.
1
Figure 3-15 — Clear all selections
2. To select audio only for the tie, if necessary, press and release the Video button
and the Audio button (fi gure 3-16).
Press the Video button to toggle on and off.
The LED is unlit when deselected.
Figure 3-16 — Select audio only
3. Press and release the input 5 button (fi gure 3-17).
4 5 6 7
Figure 3-17 — Select an input
Tel. 07131 911201
MPX 866 A Media Presentation Matrix Switcher • Operation
Fax 07131 911203
1
ESC
I/O
VIDEO AUDIO
Press the Audio button to toggle on and off.
The LED lights when selected.
The Computer/Audio Output 3, Output 4, and Output 6
LEDs light to indicate the audio ties created in example 1.
The output 1 LED does not light to indicate the tie created
in example 2 because that tie is computer video only.
1 2 3
COMPUTER/AUDIO OUTPUTS
ce-info@camboard.de
4 5 6
3-13