Table of Contents
Advertisement
im Vertrieb von
Example 1: Creating a set of video and audio ties
www.camboard.de
CAMBOARD Electronics
The following steps show an example in which input 5 is tied to outputs 3, 4, and 8.
The steps show the front panel indications that result from your action.
This example assumes that there are no ties in the current configuration.
1.
Press and release the Esc button (figure 3-5).
Press the Esc button to clear all selections.
C O N T R O L
VIEW
ESC
ENTER
PRESET
The button flashes once.
Figure 3-5 — Clear all selections
2.
To select video and audio for the tie, if necessary, press and release the
RGBHV (CrossPoint 450 Plus switchers) or Video (MAV Plus switchers)
button and the Audio button until the buttons light (figure 3-6).
Press the RGBHV/Video button to toggle on and off.
The button lights green when selected.
Figure 3-6 — Select RGBHV or video and audio
3.
Press and release the input 5 button (figure 3-7).
Press and release the Input 5 button.
The button lights green.
1
2
3
4
17 18 19 20 21 22 23 24
Figure 3-7 — Select an input
Tel. 07131 911201
CrossPoint 450 Plus and MAV Plus Switchers • Operation
Fax 07131 911203
I / O
RGBHV AUDIO
Press the Audio button to toggle on and off.
The button lights red when selected.
I
5
6
7
8
N
P
U
T
S
ce-info@camboard.de
3-11
Advertisement
Table of Contents
