Rack Mounting The Fpc Assembly; Rear Panel Connections - Extron electronics FPC 5000 User Manual

Rack Mounting the FPC Assembly

The appropriate rack mounting hardware is included with the controller. Rack
mount the controller as follows:
1. Insert the controller assembly into the rack, align the holes in the mounting
panel with those of the rack.
2. Secure the controller assembly to the rack using the supplied machine screws.

Rear Panel Connections

All connectors are on the rear of the FPC 5000 (figure 2-5).
1
Figure 2-5 — FPC 5000 Front Panel Controller rear panel features
Net port — Connect one end of a Category (CAT) 5e or higher cable,
1
terminated with RJ-45 connectors, to the FPC 5000 via this RJ-45 connector.
FPC 5000 Front Panel Controller • FPC Installation and Operation
PRN
COM3
COM4 COM2 COM1
DIO
AC 100V-230V
INPUT
The FPC 5000 ships with a 10-foot crossover CAT 5e cable.
VGA
2 3
2-5