3. Piping drawing for air blow (UT56)
③
④
4. Adjusting the air regulator
Air hose
❶
❸
③
⑤
③
①
②
❷
A
⑥
⑤
Insert the air hose to air regulator ❶ .
1)
2)
Use the air pressure at 0.4 to 0.5 MPa (4 to 5 kgf/
cm
2
).
Draw up regulator knob ❷ , turn knob ❷ and
3)
adjust the pointer to 0.4 to 0.5 MPa to adjust the air
pressure.
4)
After the adjustment, press downward regulator
knob ❷ .
When drainage is collected at section A of
5)
regulator ❶ during using, press drain cock ❸ to
discharge the drainage.
– 9 –