Names And Functions Of The Panel Keys - JUKI DDL-9000C-F Instruction Manual

2-13-2. Names and functions of the panel keys

* Changeover between the operator mode and the maintenance personnel mode is carried out by
❶ and
pressing
<Operator mode>
❺ ❸ ❽ ❼ 
❻
Switch/display
❶
Mode key
❷
Information key
❸
Sewing pattern No. button This switch is used for displaying the number of the sewing pattern.
❹
Simplified screen lock
button
❺
Sewing-start re-
verse-feed stitch button
❻
Sewing-end re-
verse-feed stitch button
❼
Part number
❽
Process/comment
❾
Clock display

Sewing pattern display

Customization button 1

Customization buttons 2
- 7

Customization buttons 2
- 11
* Confirmation of data
To change the pattern number, press Sewing pattern No. button ❸ .
Select the sewing pattern you want to use. Then, press
For the setting items of the Memory switch or sewing pattern, change the target data and press
confirm the change.
After the setting data on the number of stitches of reverse-feed stitching or the number of stitches of
multi-layer stitching has been changed, the changed setting data is confirmed by pressing
❷ simultaneously.
 ❾ ❹ ❶
 ❷
This switch is used for displaying the menu screen.
This switch is used for displaying the information screen.
This button is used for displaying the simplified lock status of the screen on it.
Locked: Unlocked:
This switch is used for changing the ON/OFF status of the reverse feed stitching at the
beginning of sewing. When reverse feed stitching at the beginning of sewing is placed
in the OFF state, mark is displayed at the upper left of the button.
This switch is used for changing the ON/OFF status of reverse feed stitching at the end
of sewing. When reverse feed stitching at the end of sewing is placed in the OFF state,
mark is displayed at the upper left of the button.
In the case the part number/process display is selected with U404, the part number is
displayed. In the case the comment display is selected, the comment is displayed.
In the case the part number/process display is selected with U404, the process is dis-
played. In the case the comment display is selected, the comment is displayed.
The time set on the sewing machine is displayed in this field in 24-hour system.
The selected sewing pattern is displayed in this field.
A selected function can be allocated to and registered with this button. Initially, the
sewing counter has been factory-allocate and -registered.
A selected function can be allocated to and registered with this button.
A selected function can be allocated to and registered with this button.
– 14 –
<Maintenance personnel mode>
❺ ❸ ❽ ❼   ❾
❻
Description
to confirm your choice.
❹ ❶
 ❷
to
.