Ink Supply Tank Assy; Ink Supply Tank Tube Assy - Epson L800 Service Manual

L800/L801

1.6.6 Ink Supply Tank Assy

Film
Be careful not to damage or peel off the film of the Ink Supply Tank.
Be careful about how to place the Ink Supply Tank Assy in order to prevent printing
failure from occurring. (See "How to place the Ink Tank Assy when disassembling/
reassembling" (p.10).)
Disassembly/Reassembly

1.6.7 Ink Supply Tank Tube Assy

Ink Supply Tank
Y
Ink Supply Tank Assy
Valve Case Tube Clamp
Ink Supply Yellow
Tank Tube Black
Light Cyan
Light Magenta
Magenta
Cyan
0.5 mm or less
Ink Supply Tank
Bk LC
Route the Ink Supply Tank Tubes with the red lines facing upward (as viewed when
the Ink Supply Tank Assy is installed on the printer) and connect them to the Ink
Supply Tank Assy without any twist.
When connecting the Ink Supply Tank Tubes to the Ink Supply Tank, confirm the
color indicated on the film of the Ink Supply Tank, and take care not to connect them
with wrong joints.
When connecting the Ink Supply Tank Tubes to the Ink Supply Tank, insert the tubes
to the full and make sure the gaps between the end of tubes and the tank are 0.5 mm
long or less.
Revision A
Joint
120 ± 1 mm
211 ± 1 mm
388 ± 4 mm
359 ± 4 mm
333 ± 3 mm
310 ± 3 mm
280 ± 3 mm
258 ± 3 mm
Ink Supply Tank Tubes Valve Case
LM M C
Confidential
64