FX Series PLC User's Manual - Data Communication Edition
N:N Network
1.3.2
Products whose production was stopped
The table below shows FX series whose production (main unit, communication equipment, etc.) was stopped.
Use the description on system configuration, etc. in this manual for maintenance.
FX Series
FX
Series
0
FX
Series
2C
FX
(FX) Series
2
FX
Series
1
1.4
Programming Tool Applicability
1.4.1
For applicable versions
The programming tool is applicable for each FX Series from the following version:
1. Japanese versions
Model name
(Software name)
FX
and FX
3U
3UC
GX Developer
SW D5C(F)-GPPW-J
FX
and FX
2N
2NC
GX Developer
SW D5C(F)-GPPW-J
FX-PCS/WIN
SW0PC-FXGP/WIN
FX-PCS-KIT/98
SW1PC-FXGP/98(-3,-5)
FX-PCS/98-3
SW1PC-FXGP/98-3
FX-PCS-KIT/V-3
SW1-PC-FXGP/V3
FX-A7PHP-KIT
SW1RX-GPPFX
FX-20P(-SET0)
FX-20P-MFXC
FX-10P(-SET0)
GOT-F900 Series display
units
F940WGOT-TWD
F940GOT-*WD
F940GOT-*BD-H
F940GOT-*BD-RH
B-6
Date when production was stopped
June 30, 2002
: Applicable (If applicable versions are limited, they are described inside ( ).)
—: Not applicable
Applicability
(applicable version)
PLCs
(Ver. SW8 P or later)
Ver. 8.13P
PLCs
(Ver. SW2 A or later)
(Ver. 2.00 or later)
(Ver. 4.00 or later)
(Ver. 4.00 or later)
(Ver. 2.00 or later)
(Ver. 3.00 or later)
(Ver. 4.00 or later)
(Ver. 3.00 or later)
(Refer to right column.)
Maintenance is offered within 7 years from the
end of production (until June 30, 2009).
Remarks
Select the model "FX3U/FX3UC".
Select the model "FX2N/FX2NC".
F940WGOT-TWD (Ver. 1.00 or later)
F940GOT-LWD, F940GOT-SWD (Ver. 1.00 or later)
F940GOT-LBD-H, F940GOT-SBD-H (Ver. 1.00 or later)
F940GOT-LBD-RH, F940GOT-SBD-RH (Ver. 1.00 or later)
1 Outline
1.4 Programming Tool Applicability
Remarks