Mitsubishi FX3U-232-BD User Manual page 226

FX Series PLC User's Manual - Data Communication Edition
Computer Link
4.1 Wiring Procedure
1
Selecting the connection method
Select the wiring method suitable to the application.
2
Preparing for wiring
Prepare cables and terminal resistors required for wiring.
3
Turning OFF the PLC power
Before starting any wiring work, make sure that the PLC power is OFF.
4
Connecting the power supply (FX
Connect the power supply to the 24V DC power terminal.
5
Wiring communication equipment
Connect communication equipment operating in accordance with RS-485 or RS-232C.
D-24
-485ADP only)
0N
→ For communication in accordance with RS-232C, refer to Section 4.4.
→ For communication in accordance with RS-485, refer to Section 4.5.
4.1 Wiring Procedure
→ For details, refer to Section 4.2.
→ For details, refer to Section 4.3.
4 Wiring