Mitsubishi FX3U-232-BD User Manual page 186

FX Series PLC User's Manual - Data Communication Edition
Parallel Link
3. Link devices
1) Sending devices for the master station
These devices are used for sending the information from the master station to the slave station.
To prevent malfunctions, do not change the setting of these devices in the slave station.
The device numbers used and number of devices vary depending on the PLC type. For applicable
devices, refer to the tables below.
a) For FX
2
Bit device
Word device
b) For FX
1S
Bit device
Word device
2) Sending devices for the slave station
These devices are used for sending the information from the slave station to the master station.
To prevent malfunctions, do not change the setting of these devices in the master station.
The device numbers used and number of devices vary depending on the PLC type. For applicable
devices, refer to the tables below.
a) For FX
2
Bit device
Word device
b) For FX
1S
Bit device
Word device
C-36
(FX , FX , FX , FX , FX
) 2C 1N 2N
Number of
Device
M800 to M899
D490 to D499
or FX Series
0N
Number of
Device
M400 to M449
D230 to D239
(FX), FX , FX , FX , FX
2C 1N 2N
Number of
Device
M900 to M999
D500 to D509
or FX Series
0N
Number of
Device
M450 to M499
D240 to D249
, FX , FX or FX
3U 1NC 2NC
devices
100
The devices in the slave station are automatically updated
to the status of devices in the master station.
10
devices
50
The devices in the slave station are automatically updated
to the status of devices in the master station.
10
, FX , FX or FX
3U 1NC 2NC
devices
100
The devices in the master station are automatically updated
to the status of devices in the slave station.
10
devices
50
The devices in the master station are automatically updated
to the status of devices in the slave station.
10
7.1 Regular Parallel Link Mode
Series
3UC
Description
Description
Series
3UC
Description
Description
7 Creating Programs