Mitsubishi FX3U-232-BD User Manual page 604

FX Series PLC User's Manual - Data Communication Edition
Programming Communication
6.1.2 Setting CPU unit (in FX
This setting is required to use the transparent function (two-port interface function) of the GOT-F900 Series in
an FX /FX
3U
3UC
The setting procedure is described below:
1
Displaying the CPU unit detailed setting window
Double-click the "PLC module" icon
window below appears.
2
Setting the CPU unit
Put a check mark next to "via GOT-F900 transparent mode".
Caution
It is not necessary to put a check mark here when not using the transparent function (two-port interface
function) of the GOT-F900 Series.
6.1.3 Setting communication time check and number of retries
The setting procedure for the communication time check and number of retries is described below:
1
Displaying the communication time check/number of retries setting window
Double-click the "No specification" icon
The window below appears.
2
Setting the communication time check and number of retries
Check at communication time: Set the time for evaluating error (1 to 9999 sec). If data from the
Initial value: 10 sec
Retry times:Set the number of retries to be executed when a communication error has occurred (0
to 5).
Initial value: 0
Set the items above if necessary.
H-34
and FX
3U
PLC.
PLC is not received within this time, it is regarded as error.
)
3UC
on the connection destination specification window. The
on the connection destination specification window.
6 Connection Setting for Personal Computer
6.1 Connection Setting (GX Developer)