Mitsubishi FX3U-232-BD User Manual page 190

FX Series PLC User's Manual - Data Communication Edition
Parallel Link
2) Sending devices for the slave station
These devices are used for sending the information from the slave station to the master station.
To prevent malfunctions, do not change the setting of these devices in the master station.
The device numbers used and number of devices vary depending on the PLC type. For applicable
devices, refer to the tables below.
a) For FX
2
Word device
b) For FX
1S
Word device
C-40
(FX), FX , FX , FX , FX
2C 1N 2N
Number of
Device
D500, D501
or FX Series
0N
Number of
Device
D240, D241
, FX , FX or FX
3U 1NC 2NC
devices
The devices in the master station are automatically updated
2
to the status of devices in the slave station.
devices
The devices in the master station are automatically updated
2
to the status of devices in the slave station.
7.2 High Speed Parallel Link Mode
Series
3UC
Description
Description
7 Creating Programs