Mitsubishi FX2N-485-BD User Manual

Side
B
Side
A
JAPANESE
This manual contains text, diagrams and explanations which will guide the reader in the correct
installation, safe use and operation of the FX
read and understood before attempting to install or use the unit. Further information can be found in the
associated manuals mentioned below.
Specifications are subject to change without notice
Safety guidelines for the user and protection of the FX
This manual has been written to be used by trained and competent personnel. The definition of such a
person or persons is as follows:
a) Any engineer using the product associated with this manual, should be of a competent nature,
trained and qualified to the local and national standards. These engineers should be fully aware of
all aspects of safety with regards to automated equipment.
b) Any commissioning or service engineer must be of a competent nature, trained and qualified to
the local and national standards.
c) All operators of the completed equipment should be trained to use this product in a safe and
coordinated manner in compliance to established safety practices.
Note: The term 'completed equipment' refers to a third party constructed device which contains or uses
the product associated with this manual.
Notes on the Symbols Used in this Manual
At various times throughout this manual certain symbols will be used to highlight points of information
which are intended to ensure the users personal safety and protect the integrity of equipment.
1) Indicates that the identified danger WILL cause physical and property damage.
2) Indicates that the identified danger could POSSIBLY cause physical and property
damage.
• Under no circumstances will Mitsubishi Electric be liable or responsible for any consequential damage
that may arise as a result of the installation or use of this equipment.
• All examples and diagrams shown in this manual are intended only as an aid to understanding the
text, not to guarantee operation. Mitsubishi Electric will accept no responsibility for the actual use of
the product based on these illustrative examples.
• Please contact a Mitsubishi distributor for more information concerning applications in life critical
situations or high reliability.
Associated Manuals
PROGRAMMING MANUAL, PROGRAMMING MANUAL ΙΙ, or FX Series User's Manual - Data
Communication Edition mentioned below are not provided in sets with a product.
Contact our agent where the product was purchased to request the manuals accordingly.
Manual Name
FX Series User's Manual - Data
★
Communication Edition
★
FX HARDWARE MANUAL
2N
★
PROGRAMMING MANUAL ΙΙ
★ Indispensable manual
This manual describes the installation the and specifications of the 485BD.
For details on wiring (including use of terminal resistor and preparation of cable) with communication equipment,
system configuration and communication setting, and program examples, refer to the "FX Series User's Manual - Data
Communication Edition".
Side
B
ENGLISH
-485-BD (hereafter abbreviated to "485BD") and should be
2N
Manual
Number
Describes contents related to communication
JY997D16901 available in FX Series PLC such as wiring,
communication setting, and program examples.
Describes contents related to hardware of FX
JY992D66301 Series PLC such as specifications, wiring, and
installation.
Describes contents related to instruction in FX
JY992D88101
FX
FX -485-BD
2N
USER'S GUIDE
JY992D74401D
-485-BD.
2N
Description
/FX /FX Series PLC.
1N 2N 2NC
2N
/
1S