Mitsubishi FX3U-232-BD User Manual page 125

FX Series PLC User's Manual - Data Communication Edition
N:N Network
Station No. 0
Data transfer
sequence error
M8183
Station No. 2
Data transfer
sequence error
M8185
M1000
M0
M1001
Y011
M1002
M15
FNC 12
K4M1010 K4Y020
MOV
FNC 12
D0 D110
MOV
M1128
M1
M1129
Y012
M1130
M18
FNC 12
K4M1140 K4M20
MOV
FNC 12
D20 D200
MOV
7.3 Creating Programs for Slave Station (Station No. "n")
Program for reading link devices
(slave station ← master or slave station)
This program is required to read information from the
master station or another slave station to a slave station.
Monitor link errors in each slave station, and read them.
The information from M1000 (link device) is read to M0.
The information from M1001 (link device) is read to Y011.
The information from M1002 (link device) is read to M15.
The information from M1010 to M1025 (link devices) is
read to Y020 to Y037.
The information from D0 (link device) is read to D110.
The information from D1128 (link device) is read to M1.
The information from D1129 (link device) is read to Y012.
The information from D1130 (link device) is read to M18.
The information from M1140 to M1155 (link devices) is
read to M20 to M35.
The information from D20 (link device) is read to D200.
→ For details on link devices, refer to Section 7.1.
→ For cautions on program creation, refer to Section 7.4.
7 Creating Programs
A
B
C
D
E
F
G
H
I
Apx.
B-33