Maximum Link Scan Time [D8202] [D202; Data Transfer Sequence Error Count [D8203 To D8210] [D203 To D210; Data Transfer Error Code [D8211 To D8218] [D211 To D218 - Mitsubishi FX3U-232-BD User Manual

Hide thumbs Also See for FX3U-232-BD:

Table of Contents

FX Series PLC User's Manual - Data Communication Edition

10.2.16 Maximum link scan time [D8202] [D202]

This device stores the maximum value of the network cycle in the N:N Network (unit: 0.1 ms).

1. Stations requiring program setting

The master station requires program setting.

2. Detailed contents

The device used varies depending on the FX Series.

3. Cautions on use

Do not change the preset numeric value using a program or programming tool.

These devices store the amount of data transfer sequence errors that occurred in the master station and

slave stations.

1. Stations requiring program setting

The master and slave stations require program setting.

However, setting for the station itself is not required.

2. Detailed contents

The device used varies depending on the FX Series.

3. Cautions on use

Data transfer sequence errors that occurred within the station itself cannot be detected.

Do not change a preset numeric value using the program or programming tool.

These devices store the error code in the master station and slave stations.

1. Stations requiring program setting

The master station requires program setting.

However, this setting for the station itself is not required.

Data transfer sequence ON

10 Related Data

10.2 Details of Related Devices

Show Quick Links

Table of Contents