Mitsubishi FX3U-232-BD User Manual page 618

FX Series PLC User's Manual - Data Communication Edition
Remote Maintenance
In the case of non-applicable versions (setting an alternative model)
Even software not applicable to a PLC can create programs when an alternative model is set.
In this case, however, programming is enabled only in the ranges provided for the alternative PLC model
such as instructions and program size.
1. Japanese versions
Model name
FX , FX , FX
1S 1N
GX Developer
SW D5C(F)-GPPW-J
FX-PCS/WIN
SW0PC-FXGP/WIN
FX-PCS-KIT/98
SW1PC-FXGP/98(-3,-5)
FX-PCS/98-3
SW1PC-FXGP/98-3
FX-PCS-KIT/V-3
SW1-PC-FXGP/V3
FX-A7PHP-KIT
SW1RX-GPPFX
FX and FX
2N 2NC
The versions applicable to FX
2. English versions
Model name
FX , FX , FX
1S 1N
GX Developer
SW D5C(F)-GPPW-E
FX-PCS/WIN-E
SW0PC-FXGP/WIN-E
FX and FX
2N 2NC
The versions applicable to FX
Other programming tools not shown above are not applicable.
I-8
: Applicable (If applicable versions are limited, they are described inside ( ).)
—: Not applicable
Applicability
(applicable version)
, FX and FX PLCs
3U 1NC 3UC
(Ver. SW2 A or later)
(Ver. 2.10 or later)
(Ver. 4.00 or later)
(Ver. 4.00 or later)
(Ver. 2.00 or later)
(Ver. 3.00 or later)
PLCs
and FX
2N 2NC
: Applicable (If applicable versions are limited, they are described inside ( ).)
—: Not applicable
Applicability
(applicable version)
, FX and FX PLCs
3U 1NC 3UC
(Ver. SW2 A or later)
(Ver. 1.00 or later)
PLCs
and FX
2N 2NC
For FX and FX
3U
The models "FX3U" and "FX3UC" cannot be selected.
"FX2N" can be selected and set as the alternative model.
The PP modem mode (ch1) and PP modem mode (ch2)
cannot be set.
For FX and FX
1N
The models "FX1N" and "FX1NC" cannot be selected.
"FX2N" or "FX2NC" can be selected and set as the
alternative model.
For FX PLC
1S
The versions on the left are not applicable.
The versions shown in the table above are applicable.
PLCs shown in the table above can be used.
For FX and FX
3U
The models "FX3U" and "FX3UC" cannot be selected.
"FX2N" can be selected and set as the alternative model.
The PP modem mode (ch1) and PP modem mode (ch2)
cannot be set.
For FX and FX
1N
The models "FX1N" and "FX1NC" cannot be selected.
"FX2N" or "FX2NC" can be selected and set as the
alternative model.
For FX PLC
1S
The versions on the left are not applicable.
The versions shown in the table above are applicable.
PLCs shown in the table above can be used.
1.4 Programming Tool Applicability
Remarks
PLC
3UC
PLC
1NC
Remarks
PLC
3UC
PLC
1NC
1 Outline