Mitsubishi FX3U-232-BD User Manual page 330

FX Series PLC User's Manual - Data Communication Edition
Inverter Communication
3. Others (which should be set if necessary)
The table below shows parameters to be considered when using various system configuration and inverters.
For the method of use, refer to the respective inverter manual.
Parameter No.
Pr37
Pr146
Pr342
*1. Pr37 cannot be set using this inverter communication function.
*2. Set Pr146 to "1" when changing the frequency from the PLC.
E-40
Parameter item
*1
Speed display
Built-in potentiometer switching
Communication EEPROM write selection
Set value
0 or 0.01 0: Frequency display, setting
to 9998 0.01 to 9998: Machine speed at 60Hz.
0: Built-in frequency setting potentiometer
*2
0 or 1
1: Built-in frequency setting potentiometer
0: EEPROM is written.
0 or 1
1: RAM is written.
5 Communication Setting in Inverter
5.6 E700 Series (when PU port is connected)
Setting contents
valid
invalid