Avaya S8700 Series Installing And Configuring page 13

See Figure 1: Duplication and control network cabling for hardware duplication
a guide to connect the cables to the media servers for hardware duplication.
See Figure 2: Duplication and control network cabling for software duplication
guide to connect the cables to the media servers for software duplication.
Figure 1: Duplication and control network cabling for hardware duplication
Figure notes:
1. Eth0 — To an Ethernet switch and/or the corporate LAN for control network A (CNA)
2. Eth2 — Server Duplication Link
3. Eth3 — To an Ethernet switch and/or the corporate LAN for control network B (CNB)
4. Eth4 — To the customer LAN if the control networks are dedicated
5. Fiber duplication cable
Note:
These are typical Ethernet port assignments. The customer might specify
Note:
different assignments for Eth0, Eth2, Eth3, and Eth4.
Installing and Configuring the Avaya S8700-Series Media Server
3
3
100 MGz
2
2
100 MGz
1
5
133 MGz
VDCI
2
3
3
100 MGz
2
2
100 MGz
1
133 MGz
VDCI
3
About media server port connections
iLO
2 1
UID
iLO
2 1
UID
on page 13 for
on page 14 for a
4
2
1
1
h3df87h2 LAO 122206
February 2007
13