Disconnecting From The Media Server; Configuring A Second Media Server - Avaya S8700 Series Installing And Configuring

7. Verify with the network administrator that the LAN hardware supports 802.1q priority
tagging. If supported, select VLAN 802.1q priority tagging.
8. Click Change. The system displays the status of the configuration update.
When the update is complete, the system displays the following message:
Successfully configured ethernet interfaces.

Disconnecting from the media server

Unplug the cross-over cable from the Services port on the back of the media server.

Configuring a second media server

Use the same procedures that you used to configure the first media server. Repeat
ARP cache on the laptop
for the second media server.
Installing and Configuring the Avaya S8700-Series Media Server
on page 27 through Disconnecting from the media server
Disconnecting from the media server
February 2007
Clearing the
on page 39
39