S8710 And S8720 Leds - Avaya S8700 Series Installing And Configuring

Chapter 8: Installation verification

S8710 and S8720 LEDs

Figure 5: LEDs on the front panel of the S8710 and the S8720 Media Servers
Figure 6: LEDs on the back panel of the S8710 and the S8720 Media Servers
the LEDs on the S8710 and the S8720 Media Servers.
You cannot test the LEDs on the S8710 Media Server.
Figure 5: LEDs on the front panel of the S8710 and the S8720 Media Servers
msdsled1 KLC 041304
Figure notes:
1. Internal health
2. Power supply
3. NIC 1 (Eth0) link/activity
(green)
68
Installing and Configuring the Avaya S8700-Series Media Server
disc
COMPACT
4. NIC 2 (Eth1) link/activity (green)
5. Indicates active when on steady or standby mode when
blinking (blue)
6. Power on/standby button/system power
- Amber: power to the chassis is on but the server is off
- Green: power is on and the system is running
To turn off the power, press and hold the Power button for
several seconds.
and
on page 69 show
1
2
3
1
4
2
5
1
6
2
February 2007