Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 74

LAG
Table 12: LAG Hashing mechanism for services configured on 7210 SAS-Mxp devices
Services
IES service (IPv4):
IES SAP to IPv4 network port
interface
IES SAP to IPv6 network port
interface
Network port IPv4 interface:
IPv4 network interface to
IPv4 network interface
Network port IPv6 interface:
IPv6 network interface to
IPv6 network interface
IES (Multicast IP traffic)
IP interface (Network or SAP)
to IP interface (SAP)
Network Port IP interface
(Multicast IP traffic)
IP interface (Network or SAP)
to IP interface (Network)
NOTES:
1. VPLS service, SDP to SDP: Test has been performed only for VC label variation with the
2. In the LSR case, incoming labels are used for hashing.
3. 'Learnt' wherever mentioned corresponds to Destination MAC.
4. Source/Destination MAC refer to 'Customer Source/Destination MACs' unless otherwise
5. 'service_id' refers to the service id of the egressing IES/VPRN service.
6. 'lag_index' refers to the Lag-IfIndex of the egressing lag.
7. 'encap_value' refers to the vlan value of the egressing lag sap.
8. 'service_vlan' and 'sap_index' are internally set uniquely for different services and
Page 68
Guide
Packet fields used for Hashing for different traffic types
IPv4 unicast traffic: Source and Destination IP, Source and
Destination L4 ports, Ingress Port-Id.
IPv4 unicast traffic: Source and Destination IP, Source and
Destination L4 ports, Ingress Port-Id.
IPv6 unicast traffic: Source and Destination IP, Source and
Destination L4 ports, Ingress Port-Id.
IPv4 Multicast traffic: Software picks a port
IPv4 Multicast traffic: Source and Destination IP, Source and
Destination L4 ports, Ingress Port-Id.
same Tunnel label.
specified.
SAPs.
7210 SAS M, T, X, R6, Mxp Interface Configuration