Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 298

Service access switch
Hide thumbs Also See for 7210 SAS M:
Table of Contents

Advertisement

Port Show Commands
Admin State
Oper Duplex
Oper State
Config Duplex
Physical Link
MTU
IfIndex
Hold time up
Last State Change
Hold time down
Configured Mode
Encap Type
Dot1Q Ethertype
Net.Egr. Queue
Pol.
Auto-negotiate
Egress Rate
Loopback
Page 292
Label
up — the port is administratively up.
down — the port is administratively down.
The operating duplex mode of the interface.
up — the port is operationally up.
down — the port is operationally down.
full — the link is configured to full duplex mode.
half — the link is configured to half duplex mode.
Yes — a physical link is present.
No — a physical link is not present.
The size of the largest packet that can be sent/received on the Ethernet
physical interface, specified in octets.
The interface's index number that reflects its initialization sequence.
The link-up dampening time in seconds. The port link dampening
timer value that reduces the number of link transitions reported to
upper layer protocols.
The last time that the operational status of the port changed state.
The link-down dampening time in seconds. The down timer controls
the dampening timer for link down transitions.
network — the port is configured for transport.
network use access — the port is configured for service access.
null — ingress frames will not use any tags or labels to delineate a ser-
vice.
dot1q — ingress frames carry 802.1Q tags where each tag signifies a
different service.
The protocol carried in an Ethernet frame.
The number of the associated network egress queue QoS policy, or
default if the default policy is used.
true — the link attempts to automatically negotiate the link speed and
duplex parameters.
false — the duplex and speed values are used for the link.
The maximum amount of egress bandwidth (in kilobits per second)
that this Ethernet interface can generate.
The type of loopback configured on the port, either line,internal, or
none.
7210 SAS M, T, X, R6, Mxp Interface Configuration Guide
Description (Continued)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7210 sas t7210 sas x7210 sas r67210 sas mxp os

Table of Contents