Table 8:
LAG Hashing mechanism for services configured on 7210 SAS-X devices
Service and Traffic direction
(For example: SAP to SDP)
PBB VPLS service:
Originating PBB BEB traffic (that
is, I-SAP to B-SAP)
PBB VPLS service:
Terminating PBB BEB traffic
(that is, B-SAP to I-SAP)
PBB Epipe service:
Originating PBB BEB traffic (that
is, PBB Epipe I-SAP to B-SAP)
PBB Epipe service:
Terminating PBB BEB traffic
(PBB Epipe SAP to B-SAP)
VPRN service:
SAP to SAP
SAP to SDP
VPRN service:
SDP to SAP
IES service and IPv4 Network
port interface:
IES SAP to IES SAP
IPv4 network port interface to
IPv4 network port interface
IES SAP to IPv4 network port
interface
7210 SAS M, T, X, R6, Mxp Interface Configuration Guide
Packet fields used for Hashing for different
traffic types
IP traffic (learnt and unlearnt): Source and
Destination IP, Source and Destination L4 ports,
Ingress Port-Id, VLAN.
L2/non-IP traffic (learnt and unlearnt): CSA,
CDA, EtherType, Ingress Port-Id.
IP traffic (learnt and unlearnt): CSA, CDA,
Ingress Port-Id.
L2/non-IP traffic (learnt and unlearnt): CSA,
CDA, EtherType, Ingress Port-Id.
IP traffic: Source and Destination IP, Source and
Destination L4 ports, Ingress Port-Id, VLAN.
L2/non-IP traffic: CSA, CDA, EtherType,
Ingress Port-Id.
IP traffic: CSA, CDA, Ingress Port-Id.
L2/non-IP traffic: CSA, CDA, EtherType,
Ingress Port-Id.
IP traffic: Source and Destination IP, Source and
Destination L4 ports, Ingress Port-Id, VLAN.
IP traffic: Source and Destination IP, Source and
Destination L4 ports, Ingress port-Id.
IPv4 unicast traffic: Source and Destination IP,
Source and Destination L4 ports, Ingress Port-Id,
VLAN.
Interface Configuration
Page 51