Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 315

*A:SAST>show>system#
============================================================
PoE Information
============================================================
PSE Maximum Power Budget
PSE Power Consumed
PSE Power Available
============================================================
PoE Port Information
============================================================
Port-Id
------------------------------------------------------------
1/1/19
1/1/20
1/1/21
1/1/22
============================================================
A:7210SAST>show>system#
internal-loopback-ports
Syntax internal-loopback-ports [detail]
Context show>system
Description
This command displays information about internal loopback ports.
Parameters
Detail — keyword - includes application information
Command to display the list of loopback ports assigned to different OAM tools and also the list of
virtual internal port(s) available and its current association.
Sample Output for 7210 SAS-M
*A:7210SAS>config>port# show system internal-loopback-ports detail
===============================================================================
Internal Loopback Port Status
===============================================================================
Port
Id
-------------------------------------------------------------------------------
1/1/12
1/1/25
========================================
Mac-swap Application Status
========================================
Enabled
Test Service Id
7210 SAS M, T, X, R6, Mxp Interface Configuration Guide
: 60 watts
: 0 watts
: 60 watts
PoE Admin/ PoE Oper/
State State
Enabled Off
Enabled Off
Enabled Off
Enabled Off
Loopback
Type
Physical
Virtual
: Yes
: 1
Class
None (0 W)
None (0 W)
None (0 W)
None (0 W)
Application Service
Enabled
Mac-Swap Yes
Mac-Swap No
Interface Configuration
Page 309