Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 66

LAG
LAG Hashing Fields used for 7210 SAS-T Network Mode
Service and Traffic direc-
tion
PBB Epipe service:
Terminating PBB BEB traffic
(PBB Epipe SAP to B-SAP)
IES service (IPv4):
IES SAP to IES SAP
IES service (IPv4 Unicast
Traffic)
IES SAP to IPv4 network port
interface
Network Port IPv4 interface
IPv4 network interface to
IPv4 network interface
VPRN service (IP traffic)
SAP to SAP
SDP to SAP
VPRN service (IP traffic)
SAP to SDP
IES (Multicast IP traffic)
IP interface (Network or
SAP) to IP interface (SAP)
Network Port IP interface
(Multicast IP traffic)
IP interface (Network or
SAP) to IP interface
(Network)
Page 60
Guide
Packet fields used for Hashing for different
traffic types
IP traffic: CSA, CDA
L2/non-IP traffic: CSA, CDA, EtherType
IPv4 unicast traffic: Source and Destination
IP, Source and Destination L4 ports.
IPv4 unicast traffic: Source and Destination
IP, Source and Destination L4 ports, Ingress
Port-ID.
IPv4 unicast traffic: Source and Destination
IP, Source and Destination L4 ports, Ingress
Port-ID.
IP traffic: Source and Destination IP, Source
and Destination L4 ports.
IP traffic: Source and Destination IP, Source
and Destination L4 ports, Ingress Port-ID.
IPv4 Multicast traffic: Source and Destination
IP, Source and Destination L4 ports, Ingress
Port-Id.
IPv4 Multicast traffic: Source and Destination
IP, Source and Destination L4 ports, Ingress
Port-Id.
7210 SAS M, T, X, R6, Mxp Interface Configuration