Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 293

Service access switch
Hide thumbs Also See for 7210 SAS M:
Table of Contents

Advertisement

Oversize Pckts
Collisions
Drop Events
CRC Align Errors
Fragments
Jabbers
Ingress Pool
Size
Octets
Packets
Packets to
Sample Output
===============================================================================
Ethernet Statistics
===============================================================================
Broadcast Pckts
Multicast Pckts
Undersize Pckts
7210 SAS M, T, X, R6, Mxp Interface Configuration Guide
Label
The total number of packets received that were longer than can be
accepted by the physical layer of that port (9900 octets excluding fram-
ing bits, but including FCS octets for GE ports) and were otherwise
well formed.
The best estimate of the total number of collisions on this Ethernet seg-
ment.
The total number of events in which packets were dropped by the
probe due to lack of resources. Note that this number is not necessarily
the number of packets dropped; it is just the number of times this con-
dition has been detected.
The total number of packets received that had a length (excluding
framing bits, but including FCS octets) of between 64 and 1518 octets,
inclusive, but had either a bad Frame Check Sequence (FCS) with an
integral number of octets (FCS Error) or a bad FCS with a non-integral
number of octets (Alignment Error).
The total number of packets received that were less than 64 octets in
length (excluding framing bits but including FCS octets) and had either
a bad Frame Check Sequence (FCS) with an integral number of octets
(FCS Error) or a bad FCS with a non-integral number of octets (Align-
ment Error).
The total number of packets received that were longer than 1518 octets
(excluding framing bits, but including FCS octets), and had either a
bad Frame Check Sequence (FCS) with an integral number of octets
(FCS Error) or a bad FCS with a non-integral number of octets (Align-
ment Error).
The amount of ingress buffer space, expressed as a percentage of the
available buffer space that will be allocated to the port for ingress buff-
ering.
The total number of octets received.
The total number of packets received.
The number of packets received that were equal to or less than the dis-
played octet limit.
:
:
:
Description (Continued)
2
Drop Events
15863
CRC/Align Errors :
0
Fragments
Interface Configuration
:
0
0
:
0
Page 287

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7210 sas t7210 sas x7210 sas r67210 sas mxp os

Table of Contents