Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 183

tx-mgmt-address
Syntax tx-mgmt-address [system]
no tx-mgmt-address
Context config>port>ethernet>lldp>dstmac
Description
This command specifies which management address to transmit.
The no form of the command resets value to the default.
Default
no tx-mgmt-address
Parameters
system — Specifies to use the system IP address. Note that the system address will only be transmitted once
it has been configured if this parameter is specified.
tx-tlvs
Syntax tx-tlvs [port-desc] [sys-name] [sys-desc] [sys-cap]
no tx-tlvs
Context config>port>ethernet>lldp>dstmac
Description This command specifies which LLDP TLVs to transmit. The no form of the command resets the value to the
default.
no tx-tlvs
Parameters
port-desc — Indicates that the LLDP agent should transmit port description TLVs.
sys-name — Indicates that the LLDP agent should transmit system name TLVs.
sys-desc — Indicates that the LLDP agent should transmit system description TLVs.
sys-cap — Indicates that the LLDP agent should transmit system capabilities TLVs.
7210 SAS M, T, X, R6, Mxp Interface Configuration Guide
Interface Configuration
Page 177