Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 297

Sample Output
*A:MTU-A#
===============================================================================
Ethernet-like Medium Statistics
===============================================================================
Alignment Errors :
FCS Errors
SQE Test Errors
CSE
Too long Frames
Symbol Errors
===============================================================================
*A:MTU-A#
Port Associations Output — The following table describes port associations output fields.
Port Associations Output Fields
Svc ID
Name
Encap Value
Sample Output
*A:MTU-A>config# show port 1/1/23 associations
===============================================================================
Interface Table
===============================================================================
Router/ServiceId
-------------------------------------------------------------------------------
Router: Base
-------------------------------------------------------------------------------
Interfaces
===============================================================================
*A:MTU-A>config#
A1 Detailed Output — The following table describes A1 detailed output fields.
Description
Interface
Oper Speed
Link-level
Config Speed
7210 SAS M, T, X, R6, Mxp Interface Configuration Guide
:
:
:
:
:
Label
The service identifier.
The name of the IP interface.
The dot1q or qinq encapsulation value on the port for this IP interface
Label
A text description of the port.
The port ID displayed in the slot/mda/port format.
The operating speed of the interface.
Ethernet — the port is configured as Ethernet.
The configured speed of the interface.
0 Sngl Collisions
0 Mult Collisions
0 Late Collisions
0 Excess Collisns
0 Int MAC Tx Errs
0 Int MAC Rx Errs
Description
Name
one
Description
Interface Configuration
: 0
: 0
: 0
: 0
: 0
: 0
Encap Val
0
Page 291