Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 262

Port Show Commands
Collect Stats
Down-When-Looped
Down On Int. Error
CRC Mon SD Thresh
CRC Mon SF Thresh
CRC Mon Window
Egress Buf (Acc)
Egress Buf (Net)
Ingress Buf
(Acc)
Ingress Pool
Size
Configured
Address
Hardware Address
Errors Input/
Output
Page 256
Label
Enabled — The collection of accounting and statistical data for the
network Ethernet port is enabled. When applying accounting policies
the data by default will be collected in the appropriate records and
written to the designated billing file.
Disabled — Collection is disabled. Statistics are still accumulated
by the IOM cards, however, the CPU will not obtain the results and
write them to the billing file.
Shows whether the feature is enabled or disabled.
Indicates if down-on-internal-error is enabled or not.
Indicates if signal-degrade threshold is configured or not.
Indicates if signal-fail threshold is configured or not.
Displays the value of window size used for CRC error monitoring
when the signal-degrade or signal-fail thresholds are configured.
The access-buffer policy for the egress buffer.
The network-buffer policy for the egress buffer.
The access-buffer policy for the ingress buffer.
The amount of ingress buffer space, expressed as a percentage of the
available buffer space, that will be allocated to the port for ingress
buffering.
The base chassis Ethernet MAC address.
The interface's hardware or system assigned MAC address at its
protocol sub-layer.
For packet-oriented interfaces, the number of inbound packets that
contained errors preventing them from being deliverable to a higher-
layer protocol. For character-oriented or fixed-length interfaces, the
number of inbound transmission units that contained errors preventing
them from being deliverable to a higher-layer protocol.
For packet-oriented interfaces, the number of outbound packets that
could not be transmitted because of errors. For character-oriented or
fixed-length interfaces, the number of outbound transmission units that
could not be transmitted because of errors.
7210 SAS M, T, X, R6, Mxp Interface Configuration Guide
Description (Continued)