Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 237

P l a t f o r m s S u p p o r t e d
7210 SAS-R6.
Description
This command displays card information.
Parameters
slot-number — Displays information for the specified card slot.
Default
Values
Displays provisioned and equipped card and MDA information.
active-resource-profile — With this parameter, the show command displays the active resource profile
currently in use by the system.
Output Show Card Output — The following table describes show card output fields.
Active System
Resource Profile
For Card
Configured Sys-
tem Resource
Profile Policy
Id
G8032 Control
Sap Tags
Ingress Internal
CAM
Sap Ingress Qos
resource
SAP Aggregate Meter
IPv4 Resource
IPv4-IPv6
Resource
Mac Resource
IPv4-Mac Resource
Net Ingress Qos
resource
7210 SAS M, T, X, R6, Mxp Interface Configuration Guide
Displays all cards.
state
Label
Policy ID: The policy ID of the active system resource profile.
Policy ID of the configured system resource profile. This will take
affect after a reboot or reset of the card.
Displays the Control VLANs reserved for use by G8032.
Resources allocated towards the Ingress internal TCAM pool
Resources allocated towards SAP ingress classification and SAP
ingress policing.
Resources allocated towards SAP aggregate meter support.
Resources allocated towards SAP ingress IPv4-IPv6 classification. See
the QoS guide for more details.
Resources allocated towards SAP ingress IPv4-IPv6 classification. See
the QoS guide for more details.
Resources allocated towards SAP ingress MAC classification. See the
QoS guide for more details.
Resources allocated towards SAP ingress IPv4 and MAC
classification. See the QoS guide for more details.
Resources allocated towards Network Ingress Qos classification (both
port-based and IP -interface based). See the QoS guide for more
details.
Interface Configuration
Description
Page 231