Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 322

LAG Commands
LAG Statistics Output — The following table describes detailed LAG statistics output fields.
LAG
Statistics
Output
Fields
LAG ID
Port ID
Input Bytes
Input Packets
Output Bytes
Output Packets
Input/Output
Errors
Totals
Sample Output
ALA-1# show lag statistics
===============================================================================
LAG Statistics
===============================================================================
Description:
Lag-id Port-id
-------------------------------------------------------------------------------
1
-------------------------------------------------------------------------------
Totals
===============================================================================
ALA-1#
Page 316
Label
The LAG or multi-link trunk (MLT) that the port is assigned to.
The port ID configured or displayed in the slot/mda/port format.
The number of incoming bytes for the LAG on a per-port basis.
The number of incoming packets for the LAG on a per-port basis.
The number of outbound bytes for the LAG on a per-port basis.
The number of outbound packets for the LAG on a per-port basis.
For packet-oriented interfaces, the number of inbound packets that
contained errors preventing them from being deliverable to a higher-
layer protocol. For character- oriented or fixed-length interfaces, the
number of inbound transmission units that contained errors preventing
them from being deliverable to a higher-layer protocol.
For packet-oriented interfaces, the number of outbound packets that
could not be transmitted because of errors. For character-oriented or
fixed-length interfaces, the number of outbound transmission units that
could not be transmitted because of errors.
Displays the column totals for bytes, packets, and errors.
Input Input
Bytes Packets
1/1/3 0 1006
1/1/4 0 435
1/1/5 0 9968
0 11409
7210 SAS M, T, X, R6, Mxp Interface Configuration Guide
Description
Output Output
Bytes Packets
0 2494
0 401
0 9833
0 12728
Input Output
Errors Errors
0 0
0 0
0 0
0 0