LAG Commands
LAG Commands
lag
Syntax
lag [lag-id] [detail] [statistics]
lag lag-id associations
lag [lag-id] description
lag [lag-id] port
Context
show
Description
This command displays Link Aggregation Group (LAG) information.
If no command line options are specified, a summary listing of all LAGs is displayed.
Parameters
lag-id — Displays only information on the specified LAG ID.
Default
Values
detail — Displays detailed LAG information.
Default
statistics — Displays LAG statistics information.
associations — Displays a list of current router interfaces to which the LAG is assigned.
description — Displays LAG description strings.
port — Display the LAG ports
Output
LAG Output — The following table describes LAG output fields.
LAG ID
Adm
Opr
Port-Threshold
Page 312
Display information for all LAG IDs.
SAS-M,X,T, Mxp- [1..25]
SAS-R6-[1..63]
Displays summary information.
Label
The LAG ID that the port is assigned to.
Up — The LAG is administratively up.
Down — The LAG is administratively down.
Up — The LAG is operationally up.
Down — The LAG is operationally down.
The number of operational links for the LAG at or below which the
configured action will be invoked.
7210 SAS M, T, X, R6, Mxp Interface Configuration Guide
Description