Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 129

LAG Commands
config
—LAG Commands
Multi-chassis Redundancy commands
config
7210 SAS M, T, X, R6, Mxp Interface Configuration Guide
— [no] lag [lag-id]
— description long-description-string
— no description
— [no] dynamic-cost
— enable-dei
— no enable-dei
— encap-type {dot1q | null | qinq}
— no encap-type
— hold-time down hold-down-time
— no hold-time
— lacp [mode] [administrative-key admin-key][system-id system-id][system-priority
priority]
— lacp-xmit-interval
— no lacp-xmit-interval
— [no] lacp-xmit-stdby
— mac ieee-address
— no mac
— mode access [uplink]
— no mode
— monitor-oper-group
— no monitor-oper-group
— no oper-group
— oper-group name
— port port-id [port-id ...up to 4 total] [priority priority] [sub-group sub-group-id]
— no port port-id [port-id ...up to 4 total]
— port-threshold
— port-threshold
— selection-criteria
— no selection-criteria
— standby-signalling
— no standby-signalling
— [no] shutdown
— redundancy
— multi-chassis
— [no]
{slow | fast}
name
value [action {dynamic-cost | down}]
[{highest-count|highest-weight|best-port}] [slave-to-partner]
{lacp | power-off}
peer ip-address [create]
— authentication-key [authentication-key | hash-key] [hash | hash2]
— no authentication-key
— description description-string
— no description
— [no] mc-lag
— hold-on-neighbor-failure
— no hold-on-neighbor-failure
Command Reference
multiplier
Page 123