Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 138

Generic Commands
Values
sys-res-profile
Syntax [no] sys-res-profile policy-id
Context config>card
Description
This CLI command provides the context to the attach the system resource-profile policy. It is supported only
on 7210 SAS-R6. On 7210 SAS-R6 devices, the system resource profile parameters are defined as a policy.
User needs to configure the system resource profile policy and associate it with the IMM card. The software
reads the configured policy and allocates resources appropriately per IMM card. It allows users to allocate
resource to different features per IMM card.
NOTE: On 7210 SAS-R, some of the system resource profile parameters are applicable to the entire node
and not per IMM card.
For more information on the CLI descriptions for System Resource Profile parameters, see the 7210 SAS-M,
T, X, R6, Mxp Basics System Guide.
Default
By default, the system attaches the default system resource-profile to each IMM when it is booted up.
Parameters policy-id — Specifies the system resource profile policy to use for this card.
Values
Page 132
7210 SAS-R6 - imm-sas-10sfp+1xfp|imm-sas-10sfp|imm-sas-2xfp| imm-sas-b-
4sfp+|imm-sas-b-2sfp+|imm-sas-b-10sfp-1sfp+| imm-sas-b-11csfp|imm-sas-b-16tx
[1-16]
7210 SAS M, T, X, R6, Mxp Interface Configuration Guide