Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 228

Hardware Commands
1
A
===============================================================================
A:7210-SAS-X >
Sample output for 7210 SAS-R6 (IMM-SAS-R and IMM-SAS-R-b):
*A:dut-b>show# card
===============================================================================
Card Summary
===============================================================================
Slot
-------------------------------------------------------------------------------
1
2
3
4
5
6
A
B
===============================================================================
*A:dut-b>show#
Show CardState Output — The following table describes show card state output fields.
Slot/MDA
Provisioned Type
Equipped Type
Admin State
Operational
State
Num Ports
Num MDA
Comments
Page 222
iom-sas
sfm-sas
Provisioned Type
Equipped Type (if different)
imm-sas-b-10sfp-1sfp+
imm-sas-b-11csfp
imm-sas-b-11csfp
imm-sas-b-11csfp
imm-sas-b-10sfp-1sfp+
imm-sas-b-10sfp-1sfp+
cpm-sf-b-sas-R6
cpm-sf-b-sas-R6
Label
The slot number of the card in the chassis.
The card type that is configured for the slot.
The card type that is actually populated in the slot.
Up — The card is administratively up.
Down — The card is administratively down.
Up — The card is operationally up.
provisioned — There is no card in the slot but it has been pre-
configured.
The number of ports available on the MDA.
The number of MDAs installed.
Indicates whether the SF/CPM is the active or standby.
7210 SAS M, T, X, R6, Mxp Interface Configuration Guide
iom-sas up
sfm-sas up
Description
up
up/active
Admin Operational Comments
State State
up up
up up
up up
up up
up up
up up
up up/active
up up/standby