Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 72

LAG
Table 12: LAG Hashing mechanism for services configured on 7210 SAS-Mxp devices
Services
VPLS service:
SAP to SDP
Epipe service:
SAP to SDP
VPLS service:
SDP to SAP
Page 66
Guide
Packet fields used for Hashing for different traffic types
IP traffic (Learnt and Unlearnt): Source and Destination IP,
Source and Destination L4 ports, Ingress Port-Id.
PBB traffic: BDA, BSA, ISID, Ingress Port-Id.
MPLS traffic: Source and Destination IP, MPLS label stack
(Two labels deep), Ingress Port-Id.
Non-IP traffic (Learnt and Unlearnt): Source and Destination
MAC, EtherType, VLAN, Ingress Port-Id.
IP traffic: Source and Destination IP, Source and Destination
L4 ports, Ingress Port-Id.
PBB traffic: BDA, BSA, ISID, Ingress Port-Id.
MPLS traffic: Source and Destination IP, MPLS label stack
(Two labels deep), Ingress Port-Id.
Non-IP traffic: Source and Destination MAC, EtherType,
VLAN, Ingress Port-Id.
Non-IP traffic (Learnt): Source and Destination MAC (Outer
MACs inside the payload, just after the MPLS header),
EtherType.
IP traffic (Learnt): Source and Destination MAC (Outer
MACs inside the payload, just after the MPLS header),
Source and Destination L4 ports, VLAN
All other (Learnt): Source and Destination MAC (Outer
MACs inside the payload, just after the MPLS header).
All traffic (Unlearnt): Source and Destination MAC (Outer
MACs inside the payload, just after the MPLS header),
Ingress Port-Id.
7210 SAS M, T, X, R6, Mxp Interface Configuration