Registering Folders; Using Smb To Connect - Ricoh Pro C720s Operating Instructions Manual

6. Registering Addresses and Users for Scanner Functions

Registering Folders

This section describes the procedure for registering, changing, and deleting folders.
By registering a shared folder, you can send scan files to it directly.
There are three types of protocol you can use:
• SMB
For sending files to shared Windows folders.
• FTP
Use when sending files to an FTP server.
• NCP
Use when sending files to a NetWare server.
• For details about protocols, server names, and folder levels, consult your network administrator.
• You can prevent unauthorized users from accessing folders from the machine. See "Registering a
6
Protection Code".
• You can only select either SMB, FTP, or NCP. If you change protocol after finishing your settings, all
previous entries are cleared.
• p.159 "Registering a Protection Code"

Using SMB to Connect

This section describes the procedure for registering, changing, and deleting SMB folders.
• To register a folder in an FTP server, see "Using FTP to Connect".
• To register a folder in an NetWare server, see "Using NCP to Connect".
• p.138 "Using FTP to Connect"
• p.143 "Using NCP to Connect"
Registering an SMB Folder
This section describes how to register an SMB folder.
132