Table of Contents
Advertisement
3. Tray Paper Settings
• Apply Duplex
You can select [Yes] or [No].
Apply Duplex is enabled only when you select [At Mode Selected] in Display Time.
Slip Sheets:
You can specify and display the paper tray in which to set slip sheets. You can also specify the display
time.
• Display Time
You can select [At Mode Selected] or [Full Time].
3
Separation Sheets:
You can specify and display the paper tray in which to set separation sheets. You can also specify
the display time.
• Display Time
You can select [At Mode Selected] or [Full Time].
Tray 7 (utilizing the Multi Bypass Tray)
Paper Size:
Select the size of the paper loaded in the optional Multi Bypass Tray (Tray 7).
This menu appears only when the Tray 7 is installed.
The paper sizes you can set for Tray 7 (utilizing the Multi Bypass Tray) are as follows:
Auto Detect, A3 , A4 , A4 , A5 , B4 JIS , B5 JIS , B5 JIS , SRA3 , 12×18 , 11×17 ,
11×15 , 11×14 , 10×15 , 10×14 , 8
1
8
/
×14 , 8
4
Custom Size
You can specify a custom size of between 139.7 - 330.2 mm (5.50" - 13.0") vertically, and between
184.1 - 487.7 mm (7.25" - 19.2") horizontally.
The default setting is Auto Detect.
Paper Type:
Sets the display so you can see what type of paper is loaded in the paper tray.
The print function uses this information to automatically select the paper tray.
The paper types you can set for the Paper Tray 7 (utilizing the Multi Bypass Tray) are as follows:
No Display, Recycled Paper, Color Paper 1, Color Paper 2, Yellow, Green, Blue, Purple, Ivory,
Orange, Pink, Red, Gray, Letterhead, Preprinted Paper, Bond Paper, Card Stock, Prepunched Paper,
Special Paper 1, Special Paper 2, Special Paper 3, Special Paper 4, Special Paper 5, Special Paper
6, Envelope, Tab Stock
74
1
/
×13 , 8×13 , 8×10 , 7
4
1
1
/
×14 , 8
/
×13 , 8
2
2
1
1
1
/
×10
/
, 7
/
×10
4
2
4
1
1
/
×11 , 8
/
×11 ,
2
2
1
1
1
/
, 5
/
×8
/
,
2
2
2
Advertisement
Table of Contents
